/*
*********************************************************************************************************
*                                       IAR Development Kits
*                                              on the
*
*                                    M451
*
* Filename      : gpio_vcc.h
* Version       : V1.00
* Programmer(s) : Qian Xianghong
*********************************************************************************************************
*/

#ifndef  USER_GPIO_VCC_PRESENT
#define  USER_GPIO_VCC_PRESENT

#define VCC_GSM_ON()	PE5 = 1
#define VCC_GSM_OFF()	PE5 = 0

#define VCC_GPS_ON()	PE6 = 0				// 低电平打开
#define VCC_GPS_OFF()	PE6 = 1
#define IS_VCC_GPS_ON() (PE6 == 0)

// RF模块开关
#define VCC_RF_ON()		PC13 = 1
#define VCC_RF_OFF()	PC13 = 0

// BD模块开关
#define VCC_BD_ON()		// PB9 = 1	// 氢压力版本，这个脚被改作按键发送
#define VCC_BD_OFF()	// PB9 = 0

// 传感器5V开关
#define VCC_SENSOR_5V_ON()		PA7 = 1
#define VCC_SENSOR_5V_OFF()		PA7 = 0

// 充电检测及唤醒脚
#define VCC_POWER_STATUS()		(PC6)

// SFlash、FRAM开关
#define VCC_SFLASH_FRAM_ON()	PC12 = 0	// 低电平打开
#define VCC_SFLASH_FRAM_OFF()	PC12 = 1

void Vcc_Init();
void Vcc_Disable();

// 恢复通信引脚输出
void Vcc_Enable();

extern volatile uint8_t LCD_Disabled;

#endif