388 lines
15 KiB
C
388 lines
15 KiB
C
/*
|
||
*********************************************************************************************************
|
||
* IAR Development Kits
|
||
* on the
|
||
*
|
||
* M451
|
||
*
|
||
* Filename : flash_config.h
|
||
* Version : V1.00
|
||
* Programmer(s) : Qian Xianghong
|
||
*********************************************************************************************************
|
||
*/
|
||
|
||
/*
|
||
*********************************************************************************************************
|
||
* INCLUDE FILES
|
||
*********************************************************************************************************
|
||
*/
|
||
#include "includes.h"
|
||
|
||
// Flash存储规划如下：
|
||
// 252~255K: 配置数据（2K+2K，双份存储）
|
||
|
||
// 每个配置块划分为4组配置
|
||
#define CONFIG_DC_SIZE (DATA_BUFF_SIZE)
|
||
|
||
// 配置分块大小（每个分区划为4个块，循环覆盖写入）
|
||
#define CONFIG_BLOCK_SIZE (CONFIG_DC_SIZE * 4)
|
||
|
||
// 配置分区大小：主分区=镜像分区=可擦除页大小
|
||
#define CONFIG_PARTITION_SIZE (CONFIG_BLOCK_SIZE * 4)
|
||
|
||
// 分区号: 0~1, 分块号: 0~3，分组号: 0~3
|
||
#define CONFIG_PARTITION(partition) (partition)
|
||
#define CONFIG_BLOCK(block) (block)
|
||
#define CONFIG_DC(DC) ((DC) - 1)
|
||
|
||
// 读写Flash的临时缓冲
|
||
static rd_buff_t rdBuff;
|
||
|
||
// 读写Flash的缓冲
|
||
uint8_t Config_rwBuf[CONFIG_BLOCK_SIZE] = {0}; // 扩展内存
|
||
|
||
static uint32_t Flash_ErasePartition(uint8_t partition)
|
||
{
|
||
uint8_t i, loop = CONFIG_PARTITION_SIZE / FLASH_ERASE_SIZE;
|
||
uint32_t u32StartAddr = FLASH_CONFIG_BASE
|
||
+ CONFIG_PARTITION(partition) * CONFIG_PARTITION_SIZE;
|
||
|
||
for(i = 0; i < loop; i++)
|
||
Flash_ErasePage(u32StartAddr + i * FLASH_ERASE_SIZE);
|
||
|
||
return TRUE;
|
||
}
|
||
|
||
static uint32_t Flash_ReadDC(uint8_t partition, uint8_t block, uint8_t DC, rd_buff_t *dataBuff)
|
||
{
|
||
uint32_t u32StartAddr = FLASH_CONFIG_BASE
|
||
+ CONFIG_PARTITION(partition) * CONFIG_PARTITION_SIZE
|
||
+ CONFIG_BLOCK(block) * CONFIG_BLOCK_SIZE
|
||
+ CONFIG_DC(DC) * CONFIG_DC_SIZE;
|
||
|
||
Flash_BufferRead(u32StartAddr, dataBuff->buff, CONFIG_DATA_LEN(DC));
|
||
return TRUE;
|
||
}
|
||
|
||
static uint32_t Flash_ReadBlock(uint8_t partition, uint8_t block, uint32_t forTest)
|
||
{
|
||
// 采集板存储配置区1、2、3的数据
|
||
if(CONFIG_BOARD_SELF == CONFIG_BOARD_SAMPLE || CONFIG_BOARD_SELF == CONFIG_BOARD_SINGLE)
|
||
{
|
||
if(!Flash_ReadDC(partition, block, CAN_DC_BOTTLE_CONFIG, &rdBuff) || !Config_CheckValid(&rdBuff, CAN_DC_BOTTLE_CONFIG))
|
||
return FALSE;
|
||
if(forTest)
|
||
return TRUE;
|
||
dcBuff.configBottle = rdBuff.configBottle;
|
||
|
||
if(!Flash_ReadDC(partition, block, CAN_DC_SENSOR_CONFIG, &rdBuff) || !Config_CheckValid(&rdBuff, CAN_DC_SENSOR_CONFIG))
|
||
return FALSE;
|
||
dcBuff.configSensor = rdBuff.configSensor;
|
||
|
||
if(!Flash_ReadDC(partition, block, CAN_DC_DATA_CONFIG, &rdBuff) || !Config_CheckValid(&rdBuff, CAN_DC_DATA_CONFIG))
|
||
return FALSE;
|
||
dcBuff.configData = rdBuff.configData;
|
||
}
|
||
|
||
// 电源板存储配置区4的数据
|
||
if(CONFIG_BOARD_SELF == CONFIG_BOARD_POWER || CONFIG_BOARD_SELF == CONFIG_BOARD_SINGLE)
|
||
{
|
||
if(!Flash_ReadDC(partition, block, CAN_DC_DISPLAY_CONFIG, &rdBuff) || !Config_CheckValid(&rdBuff, CAN_DC_DISPLAY_CONFIG))
|
||
return FALSE;
|
||
if(CONFIG_BOARD_SELF == CONFIG_BOARD_POWER)
|
||
{
|
||
if(forTest)
|
||
return TRUE;
|
||
}
|
||
dcBuff.configDisplay = rdBuff.configDisplay;
|
||
}
|
||
|
||
return TRUE;
|
||
}
|
||
|
||
static uint32_t Flash_ReadConfig(uint8_t partition, uint32_t forTest, uint8_t *blockNo)
|
||
{
|
||
uint8_t block;
|
||
|
||
for(block = 0; block < 4; block++)
|
||
{
|
||
if(Flash_ReadBlock(partition, block, forTest))
|
||
{
|
||
*blockNo = block;
|
||
return TRUE;
|
||
}
|
||
}
|
||
|
||
return FALSE;
|
||
}
|
||
|
||
static uint32_t Flash_WriteConfig(uint8_t partition)
|
||
{
|
||
uint8_t block = 0;
|
||
uint8_t i;
|
||
uint32_t u32StartAddr;
|
||
|
||
// 读取现有配置数据的块号
|
||
if(!Flash_ReadConfig(partition, TRUE, &block))
|
||
block = 3;
|
||
|
||
for(i = 0; i < 4; i++)
|
||
{
|
||
// 确定循环写入的块号
|
||
block = (block + 1) % 4;
|
||
|
||
if(!Flash_ErasePartition(partition))
|
||
return FALSE;
|
||
|
||
memset(Config_rwBuf, 0xFF, CONFIG_BLOCK_SIZE);
|
||
|
||
// 采集板存储配置区1、2、3的数据
|
||
if(CONFIG_BOARD_SELF == CONFIG_BOARD_SAMPLE || CONFIG_BOARD_SELF == CONFIG_BOARD_SINGLE)
|
||
{
|
||
rdBuff.configBottle = dcBuff.configBottle;
|
||
memmove(Config_rwBuf + CONFIG_DC(CAN_DC_BOTTLE_CONFIG) * CONFIG_DC_SIZE, rdBuff.buff, CONFIG_DATA_LEN(CAN_DC_BOTTLE_CONFIG));
|
||
|
||
rdBuff.configSensor = dcBuff.configSensor;
|
||
memmove(Config_rwBuf + CONFIG_DC(CAN_DC_SENSOR_CONFIG) * CONFIG_DC_SIZE, rdBuff.buff, CONFIG_DATA_LEN(CAN_DC_SENSOR_CONFIG));
|
||
|
||
rdBuff.configData = dcBuff.configData;
|
||
memmove(Config_rwBuf + CONFIG_DC(CAN_DC_DATA_CONFIG) * CONFIG_DC_SIZE, rdBuff.buff, CONFIG_DATA_LEN(CAN_DC_DATA_CONFIG));
|
||
}
|
||
|
||
// 电源板存储配置区4的数据
|
||
if(CONFIG_BOARD_SELF == CONFIG_BOARD_POWER || CONFIG_BOARD_SELF == CONFIG_BOARD_SINGLE)
|
||
{
|
||
rdBuff.configDisplay = dcBuff.configDisplay;
|
||
memmove(Config_rwBuf + CONFIG_DC(CAN_DC_DISPLAY_CONFIG) * CONFIG_DC_SIZE, rdBuff.buff, CONFIG_DATA_LEN(CAN_DC_DISPLAY_CONFIG));
|
||
}
|
||
|
||
u32StartAddr = FLASH_CONFIG_BASE
|
||
+ CONFIG_PARTITION(partition) * CONFIG_PARTITION_SIZE
|
||
+ CONFIG_BLOCK(block) * CONFIG_BLOCK_SIZE;
|
||
|
||
Flash_BufferWrite(u32StartAddr, Config_rwBuf, CONFIG_BLOCK_SIZE);
|
||
return TRUE;
|
||
}
|
||
return FALSE;
|
||
}
|
||
|
||
uint32_t Config_LoadConfig()
|
||
{
|
||
uint8_t block;
|
||
|
||
if(Flash_ReadConfig(0, FALSE, &block))
|
||
return TRUE;
|
||
return Flash_ReadConfig(1, FALSE, &block);
|
||
}
|
||
|
||
uint32_t Config_SaveConfig()
|
||
{
|
||
uint32_t ret = 1, ret1 = 1;
|
||
|
||
Config_ForceValid((rd_buff_t *) &dcBuff.configBottle, CAN_DC_BOTTLE_CONFIG);
|
||
Config_ForceValid((rd_buff_t *) &dcBuff.configSensor, CAN_DC_SENSOR_CONFIG);
|
||
Config_ForceValid((rd_buff_t *) &dcBuff.configData, CAN_DC_DATA_CONFIG);
|
||
Config_ForceValid((rd_buff_t *) &dcBuff.configDisplay, CAN_DC_DISPLAY_CONFIG);
|
||
|
||
// 贴片厂测试软件关闭
|
||
ret = Flash_WriteConfig(0);
|
||
ret1= Flash_WriteConfig(1);
|
||
|
||
return ret || ret1;
|
||
}
|
||
|
||
void Config_Init()
|
||
{
|
||
}
|
||
|
||
void Config_Open()
|
||
{
|
||
uint16_t i;
|
||
extern const uint16_t LSrc_DensityExt[];
|
||
|
||
// 分配扩展内存
|
||
// Config_rwBuf = SRAM_Alloc(CONFIG_BLOCK_SIZE);
|
||
|
||
delay_ms(20);
|
||
|
||
// 设置默认参数（默认参数由另一个程序写入，本程序只读出来用）
|
||
// 贴片厂测试软件打开
|
||
Config_setBottleDefParam(&dcBuff);
|
||
Config_setSensorDefParam(&dcBuff);
|
||
Config_setDataDefParam(&dcBuff);
|
||
Config_setDisplayDefParam(&dcBuff);
|
||
|
||
// 读取保存的配置
|
||
// 贴片厂测试软件关闭
|
||
Config_LoadConfig();
|
||
|
||
// 修改普莱克斯和林德的维护平台地址
|
||
if(dcBuff.configBottle.serverVer == 3 || dcBuff.configBottle.serverVer == 4)
|
||
{
|
||
strcpy(dcBuff.configData.upgServer, dcBuff.configData.server);
|
||
}
|
||
|
||
// 液位计：修正默认参数
|
||
if(dcBuff.configDisplay.op_PRODUCT_CLASS != PRODUCT_CLASS_LEVEL)
|
||
{
|
||
dcBuff.configDisplay.op_PRODUCT_CLASS = PRODUCT_CLASS_LEVEL;
|
||
if(!dcBuff.configDisplay.op_DOL_VER)
|
||
{
|
||
dcBuff.configSensor.sensorPress.lowRange = 0; // 0MPa
|
||
dcBuff.configSensor.sensorPress.highRange = 4000; // 4MPa
|
||
dcBuff.configSensor.sensorPress.zeroValue = 683; // 理论值：0.5v / 3.0v
|
||
dcBuff.configSensor.sensorPress.fullValue = 3823; // 理论值：2.8v / 3.0v
|
||
}
|
||
else
|
||
{
|
||
dcBuff.configSensor.sensorPress.lowRange = 0; // 0MPa
|
||
dcBuff.configSensor.sensorPress.highRange = 5000; // 5MPa
|
||
dcBuff.configSensor.sensorPress.zeroValue = 710; // 理论值：4mA * 130Ω / 3.0v
|
||
dcBuff.configSensor.sensorPress.fullValue = 3550; // 理论值：20mA * 130Ω / 3.0v
|
||
}
|
||
dcBuff.configBottle.warnPress = 300; // 压力报警点
|
||
dcBuff.configDisplay.L_Unit = UNIT_MMH2O; // 显示单位
|
||
// 保存
|
||
Config_SaveConfig();
|
||
}
|
||
|
||
// 新增介质密度
|
||
for(i = 0; i < sizeof(dcBuff.configBottle.densityExt) / sizeof(uint16_t); i++)
|
||
{
|
||
if(dcBuff.configBottle.densityExt[i] == 0)
|
||
dcBuff.configBottle.densityExt[i] = LSrc_DensityExt[i];
|
||
}
|
||
|
||
// 新增温度报警参数
|
||
if(dcBuff.configBottle.serverVer != 3 && dcBuff.configBottle.warnTemprH == 0 && dcBuff.configBottle.warnTempr == 0)
|
||
{
|
||
dcBuff.configBottle.warnTemprH = -300;
|
||
dcBuff.configBottle.warnTempr = -300;
|
||
}
|
||
|
||
// 填充采集板系统信息
|
||
if(CONFIG_BOARD_SELF == CONFIG_BOARD_SAMPLE || CONFIG_BOARD_SELF == CONFIG_BOARD_SINGLE)
|
||
Config_fillSampleInfo(&dcBuff);
|
||
|
||
// 填充电源板系统信息
|
||
if(CONFIG_BOARD_SELF == CONFIG_BOARD_POWER || CONFIG_BOARD_SELF == CONFIG_BOARD_SINGLE)
|
||
Config_fillPowerInfo(&dcBuff);
|
||
|
||
// 填充显示板系统信息
|
||
if(CONFIG_BOARD_SELF == CONFIG_BOARD_DISPLAY || CONFIG_BOARD_SELF == CONFIG_BOARD_SINGLE)
|
||
Config_fillDisplayInfo(&dcBuff);
|
||
|
||
// 填充蓝牙板系统信息
|
||
if(CONFIG_BOARD_SELF == CONFIG_BOARD_BLUETOOTH || CONFIG_BOARD_SELF == CONFIG_BOARD_SINGLE)
|
||
Config_fillBluetoothInfo(&dcBuff);
|
||
|
||
// 显示版本及配置信息
|
||
printf("\n****\tPSN: 20%02d%02d%02d%02d%03d ****\n", dcBuff.configBottle.PSN[0], dcBuff.configBottle.PSN[1],
|
||
dcBuff.configBottle.PSN[2], dcBuff.configBottle.PSN[3],
|
||
(dcBuff.configBottle.PSN[4] << 8) | dcBuff.configBottle.PSN[5]);
|
||
|
||
// printf("\n****\thardVer.minor: %d ***\n", dcBuff.powerInfo.hardVer.minor);
|
||
// printf("\n****\tsoftVer.minor: %d ***\n", dcBuff.powerInfo.softVer.minor);
|
||
|
||
printf("\n****\tHardVer: %d, SoftVer: %d, protcolVer: %d, SoftDate: 20%02d-%02d-%02d ***\n",
|
||
dcBuff.powerInfo.hardVer.minor, dcBuff.powerInfo.softVer.minor, dcBuff.powerInfo.protocolVer.minor,
|
||
dcBuff.powerInfo.softDate.year, dcBuff.powerInfo.softDate.month, dcBuff.powerInfo.softDate.day);
|
||
|
||
// dcBuff.configDisplay.op_DISP_MMWC_ONLY=1;
|
||
// dcBuff.configDisplay.op_LEVEL_SENSOR_ONLY=0;
|
||
|
||
if(dcBuff.configDisplay.op_DISP_MMWC_ONLY)
|
||
printf("\n\t*** op_DISP_MMWC_ONLY = 1 ***\n");
|
||
if(dcBuff.configDisplay.op_DOL_VER)
|
||
printf("\n\t*** op_DOL_VER = 1 ***\n");
|
||
if(dcBuff.configDisplay.op_BOX_VER)
|
||
printf("\n\t*** op_BOX_VER = 1 ***\n");
|
||
if(dcBuff.configDisplay.op_CELL_LOCATION)
|
||
printf("\n\t*** op_CELL_LOCATION = 1 ***\n");
|
||
if(dcBuff.configDisplay.op_LEVEL_SENSOR_ONLY)
|
||
printf("\n\t*** op_LEVEL_SENSOR_ONLY = 1 ***\n");
|
||
if(!dcBuff.configDisplay.op_LEVEL_SENSOR_ONLY)
|
||
{
|
||
if(!dcBuff.configDisplay.op_USE_PT100_SENSOR)
|
||
printf("\n\t*** op_USE_PT100_SENSOR = 0 ***\n");
|
||
if(dcBuff.configDisplay.op_USE_PT100_SENSOR && dcBuff.configDisplay.op_PT100_MULTI != 10)
|
||
printf("\n\t*** op_PT100_MULTI = %d ***\n", dcBuff.configDisplay.op_PT100_MULTI);
|
||
if(!dcBuff.configDisplay.op_PT100_3LINE)
|
||
printf("\n\t*** op_PT100_3LINE = 0 ***\n");
|
||
if(!dcBuff.configDisplay.op_DIFF_RESIST)
|
||
printf("\n\t*** op_DIFF_RESIST = 0 ***\n");
|
||
}
|
||
// if(dcBuff.configDisplay.op_SEND_GPS_DATA)
|
||
// printf("\n\t*** op_SEND_GPS_DATA = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_USE_CAPACITY_SENSOR)
|
||
// printf("\n\t*** op_USE_CAPACITY_SENSOR = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_LOCAL_DISP)
|
||
// printf("\n\t*** op_LOCAL_DISP = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_ANTI_OVERFILL)
|
||
// printf("\n\t*** op_ANTI_OVERFILL = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_ALARM_OUTPUT)
|
||
// printf("\n\t*** op_ALARM_OUTPUT = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_LOW_ALARM_OUTPUT)
|
||
// printf("\n\t*** op_LOW_ALARM_OUTPUT = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_PRESS_ALARM_OUTPUT)
|
||
// printf("\n\t*** op_PRESS_ALARM_OUTPUT = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_LOW_PRESS_ALARM_OUTPUT)
|
||
// printf("\n\t*** op_LOW_PRESS_ALARM_OUTPUT = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_DIFF_420MA)
|
||
// printf("\n\t*** op_DIFF_420MA = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_PRESS_420MA)
|
||
// printf("\n\t*** op_PRESS_420MA = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_2ND_420MA_OUT_LEVEL)
|
||
// printf("\n\t*** op_2ND_420MA_OUT_LEVEL = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_USE_R0SEMOUNT)
|
||
// printf("\n\t*** op_USE_R0SEMOUNT = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_USE_SOLAR)
|
||
// printf("\n\t*** op_USE_SOLAR = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_USE_O2_LEAK)
|
||
// printf("\n\t*** op_USE_O2_LEAK = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_LEAK_ALARM_OUTPUT)
|
||
// printf("\n\t*** op_LEAK_ALARM_OUTPUT = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_USE_DOL_TTL)
|
||
// printf("\n\t*** op_USE_DOL_TTL = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_USE_HEIGHT_LEVEL)
|
||
// printf("\n\t*** op_USE_HEIGHT_LEVEL = 1 ***\n");
|
||
// if(dcBuff.configDisplay.op_USE_PCT_LEVEL)
|
||
// printf("\n\t*** op_USE_PCT_LEVEL = 1 ***\n");
|
||
// if(dcBuff.configBottle.dispMode != DISP_MODE_ALL)
|
||
// printf("\n\t*** dispMode = %d ***\n", dcBuff.configBottle.dispMode);
|
||
|
||
// if(dcBuff.configDisplay.op_SERVER_PROTOCOL == SERVER_PROTOCOL_MQTT)
|
||
// printf("\n*** op_SERVER_PROTOCOL:\tMQTT ***\n");
|
||
// else if(dcBuff.configDisplay.op_SERVER_PROTOCOL == SERVER_PROTOCOL_HTTPS)
|
||
// printf("\n*** op_SERVER_PROTOCOL:\tHTTPS ***\n");
|
||
// else if(dcBuff.configDisplay.op_SERVER_PROTOCOL == SERVER_PROTOCOL_HTTP)
|
||
// printf("\n*** op_SERVER_PROTOCOL:\tHTTP ***\n");
|
||
// else if(dcBuff.configDisplay.op_SERVER_PROTOCOL == SERVER_PROTOCOL_TRAIN)
|
||
// printf("\n*** op_SERVER_PROTOCOL:\tTRAIN ***\n");
|
||
// else if(dcBuff.configDisplay.op_SERVER_PROTOCOL == SERVER_PROTOCOL_AOYANG)
|
||
// printf("\n*** op_SERVER_PROTOCOL:\tAOYANG ***\n");
|
||
// else if(dcBuff.configDisplay.op_SERVER_PROTOCOL == SERVER_PROTOCOL_FURUI)
|
||
// printf("\n*** op_SERVER_PROTOCOL:\tFURUI ***\n");
|
||
// else
|
||
// printf("\n*** op_SERVER_PROTOCOL:\tTCP ***\n");
|
||
// printf("\n*** Server:\t%s:%d ***\n",
|
||
// dcBuff.configDisplay.op_SERVER_PROTOCOL == SERVER_PROTOCOL_MQTT ?
|
||
// SERVER_URLs[dcBuff.configDisplay.op_SERVER_INDEX] : dcBuff.configData.server,
|
||
// dcBuff.configData.port);
|
||
// if(dcBuff.configDisplay.op_SERVER_PROTOCOL == SERVER_PROTOCOL_TCP && dcBuff.configDisplay.op_UNIDIR_COMM)
|
||
// printf("\n\t*** op_UNIDIR_COMM = 1 ***\n");
|
||
|
||
printf("\n*** Sample:\t%ds ***\n", dcBuff.configData.intervalSample);
|
||
printf("\n*** Send:\t%ds ***\n", dcBuff.configData.intervalTrans);
|
||
|
||
printf("\n*** fullPct:\t%d*0.01kpa ***\n", dcBuff.configBottle.fullPct);
|
||
printf("\n*** emptyPct:\t%d*0.01kpa ***\n", dcBuff.configBottle.emptyPct);
|
||
|
||
printf("\n*** warnPressH:\t%d*1kpa ***\n", dcBuff.configBottle.warnPressH);
|
||
printf("\n*** warnPress:\t%d*1kpa ***\n", dcBuff.configBottle.warnPress);
|
||
|
||
printf("\n*** warnTemprH:\t%d*1c ***\n", dcBuff.configBottle.warnTemprH);
|
||
printf("\n*** warnTempr:\t%d*1c ***\n", dcBuff.configBottle.warnTempr);
|
||
|
||
}
|